014-1059-030 - Follower plate for pumps with shank 30 mm subgroup-Accessoires en losse onderdelen-Vet oplossingen suitable for the transfer of

suitable for the transfer of industrial and chemical fluids

Suitable for high pressure transfer of high viscosity grease and fluids over short and long distances and for central distribution plants with multiple dispensing points

These pumps are advised for the transfer of low - medium viscosity oil (SAE 15/130)

The delivery capacity of a pump varies according to particular applications and combinations: the pressure of air supplied

5 bar and a maximum of 8 bar

014-1059-030 - Follower plate for pumps with shank 30 mm subgroup-Accessoires en losse onderdelen-Vet oplossingen suitable for the transfer ofIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.